The many uses of cantilever arms

Types of cantilever arms available

The definition of cantilever arms are freestanding racks that have one or more vertical supports with multiple horizontal loads carrying arms attached to the vertical support. Often, brace sets maycantilever arms be installed in between the vertical supports to enhance the load carrying capacity of the cantilever-type arm. Thus, the three essential parts of these arms comprise the vertical support, the horizontal arms, and the brace sets. These arms have open, easily accessible storage shelves that enable easy placement and removal of stored items.

Uses throughout various industries

The uses of these arms are not limited to industrial units. They are employed in locations as varied as construction sites, mining units, warehouses, lumber units and so on. Such arms are most commonly used for storing items such as plywood sheets, rods, logs, piping and tubing, steel bars, and so on. In short, any long and awkwardly-shaped product can be stored in such arms. If manufactured using high-quality materials, these arms can prove to be the workhorses of any site or facility. The best part about such arms is that they can be custom configured according to the demands of each application. And, once an arm is installed, it is possible to change the configuration in a few simple steps. However, it is crucial to note that such a task needs to be carried out by a professional to ensure that the structural integrity of the arm is not compromised. The user might choose to place these arms indoor or outdoor. Depending on where they need to be used, these arms must possess special coatings and material properties. A powder-coated arm, for instance, is ideal for use in rough and tough environments. It will not corrode or get scratched easily.

Important aspects of when ordering

When ordering cantilever arm systems, your manufacturer or supplier will most likely suggest the right configuration after taking into consideration the nature of your operations. However, here are some basic things that you might want to familiarize yourself with before you consult with manufacturers, this aspect the most basic one and a wrong judgment at this stage could cause damage to the objects being stored. For instance, the spacing of the arms shouldn’t be so far apart that load deflection occurs. If the arms are too short, you might have trouble placing objects correctly on the racks. If the arms are too long, you will end up wasting space, and accessibility might become a potential problem. The height of the vertical supporting beam. The upright arm of these racks needs is as tall or short as your application requires. For instance, if you are using automated forklifts loading and unloading, you could opt for longer vertical beams.

Written By Corbin